DIY EFI
Categories Sensors
Sensors
|
Suitable for use as a Coolant Temperature Sensor (CLT) on all vehicles, or as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and two crimp pins. The threads are 3/8" NPT pipe thread - note that isn't an actual 3/8" outer diameter but a pipe thread size based on pipe inner diameter.
|
25.95 €
Stocklevel: 4 |
|
|
|
|
Recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and come with the weatherproof connector and two crimp pins.
|
29.95 €
Stocklevel: 4 |
|
|
|
|
Coil resistance ≤1k |
18.95 €
Stocklevel: 6 |
|
|
|
|
Hoek: 105 ° Uitvoering: Met terugstelveer Lineariteit: ±3 % Type: 4162400010 Weerstand: 4 kΩ (± 20 %) Temperatuurbereik: -40 - +120 °C Voedingsspanning: 5 V (±0,1 V) U: 150 - 5000 mV |
Stocklevel: 10 |
|
|
|
|
Recommended 'Fast-Response' Intake Air Temp Sensor (IAT) for use on forced induction vehicles. The come with the weatherproof connector and two crimp pins.
|
27.75 €
Stocklevel: 1 |
|
|
|
|
They come with the weatherproof connector and two crimp pins.
|
19.75 €
Stocklevel: 3 |
|
|
|
|
This MAP sensor incorporates the latest MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology. It is specifically designed for tough automotive applications to perform in the harsh underhood environments including extreme temperatures, vibration, thermal and mechanical shock, and corrosive chemicals. The output specifications are set to be the same as the ones from GM 12223861 3.0 Bar Sensor to allow more compatibility with boost gauges and controllers on the market. |
92.95 €
Stocklevel: 2 |
|
|
|
|
This MAP sensor incorporates the latest MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology. It is specifically designed for tough automotive applications to perform in the harsh underhood environments including extreme temperatures, vibration, thermal and mechanical shock, and corrosive chemicals. The output specifications are set to be the same as the ones from GM 12569240 1.0 Bar Sensor to allow more compatibility with boost gauges and controllers on the market. |
53.95 €
Stocklevel: 2 |
|
|
|
|
Weatherproof connector and two crimp pins.
|
3.95 €
Stocklevel: 11 |
|
|
|
|
Weatherproof connector and two crimp pins.
|
6.45 €
Stocklevel: 10 |
|
|
|
|
MPX4250AP MAP Sensor Standard 2.5 bar Map Sensor used in MegaSquirt PCB 2.2/3.0/3.57 ECUs. Good for 21-22psi of boost, or for NA usage in non-boosted applications. |
29.95 €
Stocklevel: 2 |
|
|
|
|
Weatherproof connector and 3 crimp pins and seals.
|
6.50 €
Stocklevel: 17 |
|
|
|
|
Weatherproof connector and 3 crimp pins and seals.
|
5.50 €
Stocklevel: 38 |
|
|
|