Print

JimStim


Display per page
Sort by

Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car!

The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for Wheel” to test your RPM input on the Stim, you can tell the JimStim to provide a signal like the one from a Neon, Miata, Subaru, most Fords, and many more. It can also drive ignition input mods with pull-ups.

We also included a set of user-configurable jumpers that let you wire it to test IAC motor outputs, spare inputs, and spare outputs. You can wire these up with the selection jumper wires. There is also a bank of screw terminals that let you connect things other than a standard Megasquirt to the JimStim. So if you’re looking for a Stimulator to test out your Microsquirt, MS3-Pro, or other Megasquirt devices that don’t have the standard DB37 connector, you can wire one of these up to a JimStim to test it out.

You can find the JimStim documentation and assembly instructions at this link.

92.95
Delivery weight: 150 g

Stocklevel: 5

Use this board to test the MegaSquirt’s inputs and outputs on the bench, before you install it on a car!

The JimStim features a microcontroller which allows the simulation of up to 30 different toothed wheels, in addition to the standard distributor signal of the standard stimulator. Instead of having the Megasquirt set to “Stim for Wheel” to test your RPM input on the Stim, you can tell the JimStim to provide a signal like the one from a Neon, Miata, Subaru, most Fords, and many more. It can also drive ignition input mods with pull-ups.

We also included a set of user-configurable jumpers that let you wire it to test IAC motor outputs, spare inputs, and spare outputs. You can wire these up with the selection jumper wires. There is also a bank of screw terminals that let you connect things other than a standard Megasquirt to the JimStim. So if you’re looking for a Stimulator to test out your Microsquirt, MS3-Pro, or other Megasquirt devices that don’t have the standard DB37 connector, you can wire one of these up to a JimStim to test it out.

You can find the JimStim documentation and assembly instructions at this link.

135.95

Not in stock: 4 day delivery period

18.95

Stocklevel: 4

The regular JimStim can test the main board on your MS3. But what if you’d like to see the inputs and outputs on the MS3X expansion card in action, too? Now it’s easy – just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 volt power, ground, and cam signal to the JimStimX, and you can test the outputs with the LEDs and use the DIP switch and three trim pots to control the four on/off and three analog inputs.

This build it yourself kit includes everything you need to put a JimStimX together except the solder. Everything is included in the same pre-labeled bag styles we use in our MegaSquirt kits.

Requires a JimStim for proper operation, sold separately.

Assembly guide: Click HERE!

62.95
Delivery weight: 150 g

Stocklevel: 2

The regular JimStim can test the main board on your MS3. But what if you’d like to see the inputs and outputs on the MS3X expansion card in action, too? Now it’s easy – just add a JimStimX! Use the three pull-off jumpers on the JimStim to connect the 5 volt power, ground, and cam signal to the JimStimX, and you can test the outputs with the LEDs and use the DIP switch and three trim pots to control the four on/off and three analog inputs.

Requires a JimStim for proper operation, sold separately.

 

105.95
Delivery weight: 150 g

Not in stock: 18 day delivery period

For JimStim 12 V/DC 0.63 A 6 W

12.95

Not in stock: 4 day delivery period